Kyocera TASKalfa 3050ci Operation Manual page 369

Send Log History
You can also send the log history to the specified destinations manually.
Use the procedure below to send the log history manually.
1
Press the System Menu key.
2
Press [Report], [Next] of Sending Log History and then [Start] of Send Log History.
When the confirmation screen appears, press [Yes]. The log history is sent.
Job Log Subject
Set the subject automatically entered when sending log histories by e-mail.
Use the procedure below to set the subject.
1
Press the System Menu key.
2
Press [Report], [Next] of Sending Log History and then [Change] of Job Log Subject.
3
Enter an e-mail subject not more than 60 characters.
NOTE:
Refer to the Character Entry Method on Appendix-9 for details on entering characters.
4
Check that the entry is correct and press [OK].
9-65
Default Setting (System Menu)
9