Kyocera TASKalfa 3050ci Operation Manual page 322

Use the procedure below to select the default quality setting for originals.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default original document type.
4
Press [OK].
Org. Image (Send/Store)
Select the default original document type for sending and storing in a document box. The available default
settings are shown below.
Item
Text+Photo
Photo
Text
Text (for OCR)
Use the procedure below to select the default quality setting for originals.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select [Text+Photo], [Photo], [Text] or [Text (for OCR)] for the default.
4
Press [OK].
Scan Resolution
Select the default scanning resolution. The options are 600x600dpi, 400x400dpi Ultra Fine, 300x300dpi,
200x400dpi Super Fine, 200x200dpi Fine, 200x100dpi Normal.
Use the procedure below to select the default resolution setting.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default resolution.
4
Press [OK].
], [Next] of Function Defaults and then [Change] of Original Image (Copy).
Text and photos together.
For photos taken with a camera.
Sharply renders pencil text and fine lines.
Image quality suitable for OCR software.
], [Next] of Function Defaults and then [Change] of Org. Image (Send/Store).
], [Next] of Function Defaults and then [Change] of Scan Resolution.
9-18
Default Setting (System Menu)
Description