Original/Paper Settings - Kyocera TASKalfa 3050ci Operation Manual

Sound
Set options for buzzer sound during the machine operations.
The table below lists the buzzer types and their settings and details.
Item
Volume
Key Confirmation
Job Finish
Ready
Warning
USB Keyboard
This is displayed when the optional fax kit is installed.
*
Use the procedure below to set the sound options.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Sound and then [Next] of Buzzer.
3
Press [Change] of Volume, Key Confirmation, Job Finish, Ready, Warning, or USB Keyboard.
4
Select the buzzer volume level, or other sound options.

Original/Paper Settings

Register additional types and sizes of originals and paper.
Custom Original Size
Set up frequently-used custom original sizes. The custom size options are displayed on the screen to select
original size. The dimensions available are as follows.
The table below lists the sizes that can be registered.
Input units
Inch models
Metric models
Value
0 (Mute), 1 (Minimum) to
5 (Maximum)
Off, On
Off, On,
FAX Reception Only*
Off, On
Off, On
Off, On
X: 2.00 to 17.00" (in 0.01" increments)
Y: 2.00 to 11.69" (in 0.01" increments)
X: 50 to 432 mm (in 1 mm increments)
Y: 50 to 297 mm (in 1 mm increments)
9-4
Default Setting (System Menu)
Description
Set the buzzer volume level.
Emit a sound when the control panel
and touch panel keys are pressed.
Emit a sound when a print job is
normally completed.
Emit a sound when the warm-up is
completed.
Emit a sound when errors occur.
Emit a sound when a USB keyboard is
operated.
Dimensions