Color Setting; Gloss Mode - Kyocera TASKalfa 3050ci Operation Manual

Setting of Alternative Emulation
When you have selected [KPDL(Auto)] as emulation mode, you can switch between KPDL and another
emulation mode (alternative emulation) automatically according to the data to print. The alternative emulation
you can set is [PCL6].
Use the procedure below to select the alternative emulation.
1
Press the System Menu Key.
2
Press [Printer] > [Change] of Emulation > [KPDL(Auto)] > [Alt Emulation].
3
Select the desired alternative emulation and then press [OK].
4
Press [OK].
Setting of KPDL error report
When an error has occurred during printing in KPDL emulation mode, set whether or not the error report is
output. The default setting is Off (not output).
Use the procedure below to specify the KPDL error report setting.
1
Press the System Menu Key.
2
Press [Printer] > [Change] of Emulation > [KPDL] or [KPDL(Auto)] > [KPDL Error Report].
3
Press [On] or [Off] and then press [OK].
4
Press [OK].

Color Setting

You can choose whether status reports are printed in color or black and white.
Use the procedure below to select the color setting.
1
Press the System Menu key.
2
Press [Printer] and then [Change] of Color Setting.
3
Select [Color] or [Black & White].
4
Press [OK].

Gloss Mode

This feature can be used to set the glossiness of printed matter.
Use the procedure below to set the Gloss Mode.
1
Press the System Menu key.
2
Press [Printer] and then [Change] of Gloss Mode.
3
Select [Off] or [On].
4
Press [OK].
9-56
Default Setting (System Menu)