Counting The Number Of Pages Printed - Kyocera TASKalfa 3050ci Operation Manual

User Login/Job Accounting - Copy Restriction (Total)
Set the default limit value for restricting use of the functions for each account
by counter.
Use [-]/[+] or the numeric keys to enter a number.
Status

Counting the Number of Pages Printed

This counts the number of pages printed. Counts are classified into Total Job Accounting and Each Job Accounting.
A new count can also be started after resetting the count data which was stored for a certain period of time.
Types of the counts are as follows.
Item
Printed Pages
Scanned Pages
FAX Transmission Pages*
FAX Transmission Time*
* Only displayed when the optional fax kit is installed.
(1 - 9999999)
99999
Cancel OK
10/10/2010 10:10
Displays the number of pages copied and printed, and the total
number of pages used. You can also use [Count by Paper Size] and
[Count by Duplex/Combine] to check the number of pages used.
• For copying, you can check the pages used for black and white,
full-color and single-color copying as well as the total pages
used.
• For printing, you can check the pages used for black and white
and full-color printing as well as the total pages used.
• You can use [Count by Paper Size] to check the number of
pages used in the paper size set in Count by Paper Size on page
10-30 as well as the number of pages used in other paper sizes.
• You can use the [Count by Duplex/Combine] to check the
number of pages used in Duplex (1-sided) mode, Duplex (2-
sided) mode and the total for both, as well as the pages used in
Combine (None) mode, Combine (2in1) mode, Combine (4in1)
mode and the total for all three.
Displays the number of pages scanned for copying, faxing* and
other functions, as well as the total number of pages scanned.
Displays the number of pages faxed.
Displays the total duration of fax transmissions.
5
Press [Change] for the item you want to modify and
then press [+] or [-] or use the numeric keys to enter
the default restriction on the number of sheets.
6
Press [OK].
7
To set another default restriction, repeat steps 5 to 6.
Detail
10-28
Management