Kyocera TASKalfa 3050ci Operation Manual page 326

Use the procedure below to select the default Prevent Bleed-thru (Copy).
1
Press the System Menu key.
2
Press [Common Settings], [
(Copy).
3
Set the default Prevent Bleed-thru (Copy).
4
Press [OK].
Prevent Bleed(Send/Store)
Set the default Prevent Bleed(Send/Store).
Item
Off
On
Use the procedure below to select the default Prevent Bleed(Send/Store).
1
Press the System Menu key.
2
Press [Common Settings], [
Store).
3
Set the default Prevent Bleed(Send/Store).
4
Press [OK].
Zoom
Select the enlarged/reduced default settings when paper size/sending size is changed after the originals are set.
The available default settings are shown below.
Item
100%
Auto
Use the procedure below to select the default zoom setting.
1
Press the System Menu key.
2
Press [Common Settings], [
3
Select the default zoom setting.
4
Press [OK].
], [Next] of Function Defaults, [
Do not reduce show-through.
Reduce show-through.
], [Next] of Function Defaults, [
Copy (send/save) at actual size (100%).
Automatically reduce or enlarge the originals to match the paper
size/ sending size.
], [Next] of Function Defaults, [
9-22
Default Setting (System Menu)
] and then [Change] of Prevent Bleed-thru
Description
] and then [Change] of Prevent Bleed(Send/
Description
] three times and then [Change] of Zoom.