Kyocera TASKalfa 3050ci Operation Manual page 87

3
Adjust the paper width guides to the width of the
paper.
After removing new paper from its packaging, fan
the paper before loading it in the multi-purpose tray.
(Refer to Before Loading Paper on page 2-28)
4
Insert the paper along the paper width guides into
the tray until it stops.
IMPORTANT: Keep the print side facing up.
Curled paper must be uncurled before use.
Straighten the top edge if it is curled.
When loading paper into the multi purpose tray, check
that there is no paper left over in the tray from a previous
job before loading the paper. If there is just a small
amount of paper left over in the multi purpose tray and
you want to add more, first remove the left-over paper
from the tray and include it with the new paper before
loading the paper back into the tray.
If there is a gap between the paper and the paper width
guides, readjust the guides to fit the paper in order to
prevent skewed feeding and paper jams.
IMPORTANT: Ensure that the loaded paper does not
exceed the level indicator (see illustration).
2-37
Preparation before Use
2