Kyocera TASKalfa 3050ci Operation Manual page 338

Sending Jobs
Configure stamp settings for sending documents.
After configuring the setting, return to the Sending Functions or Document Box (Sending Documents) screen
from the system menu, and press the Reset key.
Text Stamp
Select whether or not a text stamp is used.
Use the procedure below to set a Text Stamp.
1
Press the System Menu key.
2
Press [Common Settings] > [
Stamp.
3
Select [Off] or [On].
4
Press [OK].
NOTE:
When [On] is selected, the Text Stamp settings cannot be changed when sending.
Edit Text Stamp
Set the default text stamp.
Use the procedure below to Edit a Text Stamp.
1
Press the System Menu key.
2
Press [Common Settings] > [
Stamp.
3
Press [Keyboard] and enter a maximum of 32 characters for the text string, or select the text stamp to be
printed from the displayed templates.
4
Press [Position] and set the position of the printed text stamp.
Positions that can be selected are [Top Left], [Top Middle], [Top Right], [Middle Left], [Center], [Middle Right],
[Bottom Left], [Bottom Middle], and [Bottom Right].
5
Press [Font] and set font and display settings for the printed text stamp.
The following settings can be selected.
Item
Size
Style
Font
Color
Density
Display Pattern
6
Press [OK].
] > [Next] in System Stamp > [Next] in Sending Jobs > [Change] in Text
] > [Next] in System Stamp > [Next] in Sending Jobs > [Change] in Edit Text
Set the font size of the printed text stamp.
Set the font style of the printed text stamp. [Bold] or [Italic] can be set.
Set the font of the printed text stamp. [Courier] or [Letter Gothic] can
be set.
Set the color of the printed text stamp. [Black], [Cyan], [Magenta],
[Yellow], [Red], [Green], or [Blue] can be set.
Set the density of the color of the printed text stamp.
Set the display method of the printed text stamp. [Transparent],
[Clipping], or [Overwrite] can be selected.
9-34
Default Setting (System Menu)
Description