Kyocera TASKalfa 3050ci Operation Manual page 420

NOTE:
By default, one of each default user with machine administrator rights and administrator privileges is
already stored.
Each user's properties are:
Machine Administrator
User Name: DeviceAdmin
Login User Name: 30/30 ppm model : 3000, 35/35 ppm model : 3500, 45/45 ppm model : 4500,
55/50 ppm model : 5500
Login Password: 30/30 ppm model : 3000, 35/35 ppm model : 3500, 45/45 ppm model : 4500,
55/50 ppm model : 5500
Access Level: Machine Administrator
Administrator
User Name: Admin
Login User Name: Admin
Login Password: Admin
Access Level: Administrator
It is recommended to periodically change the user name, login user name and login password regularly for your
security.
Use the procedure below to register a new user.
User:
User Name:
Change
01 User
Login User Name: Change
0099
Access Level:
Change
User
E-mail Address: Change
abcd@efg.com
Next
Local Authorization:
Status
Login Password: Change
**********
Account Name:
Change
02 Account
ID Card Information: Change
Empty
Cancel Save
10/10/2010 10:10
1
Login as a user with administrator rights.
2
Press the System Menu key.
3
Press [User Login/Job Accounting].
4
If the user authentication screen appears, enter
your login user name and password and then press
[Login]. For this, you need to login with
administrator privileges. Refer to Adding a User
(Local User List) on page 10-5 for the default login
user name and password.
5
Press [Next] of User Login Setting, [Add/Edit] of
Local User List, and then [Add].
6
Press [Change] of User Name.
7
Enter the user name and press [OK].
NOTE:
Refer to the Character Entry Method on
Appendix-9 for details on entering characters.
8
Enter the login user name and E-mail address
following 6 and 7 above.
9
Press [Change] of Login Password and then
[Password].
10-6
Management