File Name; Priority Override - Kyocera TASKalfa 250ci Operation Manual

File Name

Names a copy job. Add other information such as date and time or job number as necessary. You can check a
job history or job status using the job name, date and time, or job number specified here.
Use the procedure below to assign a name to your copy job.
Ready to copy.
File Name Entry
Add a file name.
Additional information such as Job No.
and Date and Time can also be set.

File Name

doc
Additional Info
Job No.
Date and Time
Job No.
Add Shortcut
Status

Priority Override

Suspends a current job and gives the selected job priority for copying. The suspended job resumes after Priority
Override copying is finished.
NOTE:
The current job that is selected as Priority Override cannot be suspended.
The procedure for using Priority Override is explained below.
1
2
3
4
Copies
5
Cancel OK
10/10/2008 10:10
6
1
2
3
4
5
6
4-41
Press the Copy key.
Place the originals on the platen.
Press [Advanced Setup] and then [File Name Entry].
Press [File Name], enter the name for a copy job,
and press [OK].
To add date and time, press [Date and Time]. To
add job number, [Job No.]. Added information is
displayed in Additional Info.
Press [OK].
Press the Start key to start copying.
Press the Copy key.
Place the originals on the platen.
Press [Advanced Setup] and then [Priority
Override].
Press [On] to select Priority Override.
Press [OK].
Press the Start key. The current copy job is
suspended and the copy job selected in Priority
Override starts. The suspended job resumes after
Priority Override copying is finished.
Copying Functions
4