Kyocera TASKalfa 250ci Operation Manual page 85

XY Zoom
The procedure for using zoom copying is explained below.
Ready to copy.
Zoom
Standard
Zoom
400%
XY Zoom
Place original.
200%
154%
Original : ---
: 129%
Zoom 400%
Paper : ---
121%
Preview
Add Shortcut
Status
Ready to copy.
Zoom
X
Standard
Zoom
XY Zoom
Place original.
Y
Original : ---
Zoom : 100%
Paper : ---
Preview
Add Shortcut
Status
Y
X
Copies
(25 - 400)
400 %
Legal
Max.
78%
>>Letter
STMT Ledger
# Keys 77%
>>Ledger >>Legal
STMT 100% Ledger
64%
>>Legal >>Letter
Letter Auto Ledger
50%
>>Ledger >>STMT
Legal Min.
25%
>>Ledger
Cancel OK
10/10/2008 10:10
Copies
(25 - 400)
100
%
# Keys
(25 - 400)
100
%
Top Edge Top
Original
Orientation
# Keys
Cancel
OK
10/10/2008 10:10
Select vertical and horizontal magnifications
individually. Reduce or enlarge original images in 1%
increments between 25% and 400%.
1
Press the Copy key.
2
Place the originals on the platen.
3
Set the original on the platen and press [Layout/
Edit] -> [Zoom].
4
Press [Standard Zoom] to use Auto Zoom.
Press [+] or [–] to change the displayed
magnification as desired. You can also enter the
magnification directly using the numeric keys by
pressing [# Keys].
When using Preset Zoom, select the key of desired
magnification.
When using XY Zoom, press [XY Zoom].
Press [+] or [–] to change the displayed
magnifications of X (horizontal) and Y (vertical).
You can also enter the magnification directly using
the numeric keys by pressing [# Keys].
Press [Original Orientation] to select orientation of
the originals, either [Top Edge Top] or [Top Edge
Left]. Then press [OK].
5
Press [OK].
6
Press the Start key. Copying begins.
3-11
Basic Operation
3