Zoom - Kyocera TASKalfa 250ci Operation Manual

Zoom

Scans the original by automatically zooming it depending on the sending size.
The table below lists the available options.
Item
100%
Auto
NOTE:
When zooming in or out, see Sending Size Selection on page 5-3 when selecting the sending size.
Depending on the combination of original size and sending size, the image is placed at the edge of the paper.
To center the image vertically and horizontally on the page, use the centering setting described in Centering on
page 5-6.
Use the procedure below to enlarge or reduce the original to match the transmission size.
Ready to send.
Place original.

Zoom

Enlarge or reduce original when scanning.
[100%]: Scan at actual size.
[Auto]: Enlarge or reduce to match
sending size/storing size.
Place original.
Original : ---
100%
Zoom : 100%
Send : ---
Preview
Add Shortcut
Status
No Zoom (to be scanned at actual size)
Zoomed automatically according to the specified sending size.
1
2
3
4
5
Destination
6
Auto
Cancel OK
08/08/2009 10:10
7
5-5
Detail
Press the Send key.
Place the originals on the platen.
Select the transmission size.
Press [Advanced Setup] and then [Zoom].
Press [100%] or [Auto].
Press [OK].
Specify the destination, and press the Start key to
start sending.
Sending Functions
5