Kyocera TASKalfa 250ci Operation Manual page 251

Default Paper Source
Select the default paper source from Cassette 1-4 and Multi Purpose Tray.
NOTE:
[Cassette 3] is displayed when either of the optional paper feeder or 3,000 sheet paper feeder is
installed, and [Cassette 4] is displayed when the optional paper feeder is installed.
Use the procedure below to select the default paper source.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Settings and then [Change] of Default Paper Source.
3
Select a paper cassette for the default setting.
4
Press [OK].
5
Move to the copy or document box screen and press the Reset key.
Automatic Detection of Originals (Available for metric models only)
Automatically detect originals of special or non-standard size.
The table below lists the special or non-standard original sizes.
Item
A6/Hagaki
Folio
11x15"
Use the procedure below to set automatic detection of originals.
1
Press the System Menu key.
2
Press [Common Settings], [Next] of Original / Paper Settings and then [Change] of Original Auto Detect.
3
Select [A6] or [Hagaki] of A6/Hagaki.
Select [Off] to disable automatic detection or [On] to enable automatic detection of Folio and 11x15"
respectively.
4
Press [OK].
Media for Auto Selection (Color/B&W)
Select a default media type for auto paper selection when [Auto] is selected of Paper Selection. If Plain is
selected, the paper source with plain paper loaded in the specific size is selected. Select [All Media Types] for
the paper source with any kind of paper loaded in the specific size.
NOTE:
Default media types can be set for both Color and Black and White.
As A6 and Hagaki are similar in size, select either one of them for
automatic detection.
Select Folio for automatic detection.
Select the 11×15" size for automatic detection.
8-9
Default Setting (System Menu)
Description
8