Adjusting The Operation Panel Angle; Switching The Language For Display [Language] - Kyocera TASKalfa 250ci Operation Manual

Adjusting the Operation Panel Angle

Switching the Language for Display [Language]

Select the language displayed on the touch panel.
Use the procedure below to select the language.
Common Settings - Language
Set the language to use for the touch panel display.
English Deutsch Français
Nederlands Português
Status
Español Italiano
Cancel OK
10/10/2008 10:10
2-11
Adjust the angle of the operation panel in two as shown
by releasing the operation panel lock lever.
1
Press the System Menu key.
2
Press [Common Settings] and then [Change] of
Language.
3
Press the key for the language you want to use.
4
Press [OK].
The touch panel language will be changed.
Preparation before Use
2