Using A Custom Box - Kyocera TASKalfa 250ci Operation Manual

Using a Custom Box

NOTE:
In the following explanation, it is assumed that user login administration is enabled. For details on User
Logon privileges, refer to User Privileges on page 3-40.
Creating a New Custom Box
Use the procedure below to create a new box in the user box.
Custom Box.
No. Name Owner
0001 SALES Anonymous
Store File
Custom Box Job Box Removable Memory
Status
Item
Box No
Box Name
Box Password
Used Area
- - - -
Search(Name)
Search(No.)
Register/Edit
1/1
Box
Detail Open
FAX Box
08/08/2009
Enter the box number by pressing [-, +] or number keys.
The box number can be from 0001 to 1000. A Custom Box should
have a unique number.
If you enter 0000, the smallest number available will be
automatically assigned.
Enter a box name consisting of up to 32 characters.
Refer to the Character Entry Method on Appendix-7 for details on
entering characters.
User access to the box can be restricted by specifying a password
to protect the box. Entering a password is not mandatory.
Enter the same password of up to 16 characters in both [Password]
and [Confirm Password].
1
Press the Document Box key.
2
Press [Custom Box] and then [Register/Edit Box].
10:10
3
Press [Add].
4
Press [Change] for each item, enter the information
and then press [OK].
The table below lists the items to be set.
Detail
6-2
Document Box