Hue Adjustment - Kyocera TASKalfa 250ci Operation Manual

Hue Adjustment

Adjust the color (hue) of images. Make adjustments such as adjusting red to a strong yellow-red or yellow to a
strong green-yellow to make more creative copies.
The items that may be configured are as follows.
Red
Magenta
Follow the steps below to use image hue adjustment.
Ready to copy.

Hue Adjustment

Off
All
Place original.
Yellow - Green
& Blue - Magenta
Green - Cyan
Original : ---
& Magenta - Red
Zoom : 100%
Paper : ---
Cyan - Blue
& Red - Yellow
Preview
Add Shortcut
Status
Yellow
Green
Cyan
Blue
Copies
Adjust hue for all colors.
Yellow
Red Green
Magenta Cyan
Blue
Cancel OK
10/10/2008 10:10
• All: Adjust hue for all colors.
• Yellow - Green & Blue - Magenta: Adjust color
balance for yellow and green, and blue and magenta.
• Green - Cyan & Magenta - Red: Adjust color balance
for green and cyan, and magenta and red.
• Cyan - Blue & Red - Yellow: Adjust color balance
for cyan and blue, and red and yellow.
NOTE:
This feature is used with full color copying.
This feature can not be used together with Adjusting
Density (see page 3-8).
This feature can not be used together with One touch
Image Adjust mode (see page 4-33).
These adjustments are especially useful on rich color
images.
1
Press Copy key.
2
Place the originals on the platen.
3
Press [Color/Image Quality] and then press [Hue
Adjustment].
4
Select the item for which the hue is to be adjusted
and then press [ ] or [
4-31
Copying Functions
] to make the adjustment.
4