Kyocera TASKalfa 250ci Operation Manual page 393

Account:
Printed Pages:
Check
FAX Transmission Pages:
2(20)
Counter Reset: Execute
Status
Counting by Paper Size
This counts the number of pages by paper size (e.g. Letter).
NOTE:
Paper size is available in five types, - 1 to 5. These types are specified in accounting reports. Refer to
Printing an Accounting Report on page 11-26.
In addition to paper size, media type can also be specified (e.g. count the letter-size color paper used). If no
media type is specified, usage is counted for all media types of that size.
Use the procedure below to count the number of pages.
User Login/Job Accounting - Paper Size 1
Select the paper sizes and types to count.
Off
A3 A4
A5 B4
On
B5 Folio
Ledger Legal
Letter Statement
Status
Scanned Pages: Check
FAX Transmission Time:
0:00:10
Close
10/10/2008 10:10
Plain
Media Type
Cancel OK
10/10/2008 10:10
11-25
7
Press [Check] at the function to check the count.
The results will be displayed.
8
Confirm the count and press [Close].
9
Press [Execute] of Counter Reset to reset the
counter.
10
Press [Yes] on the screen to confirm the reset. The
counter will be reset.
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
4
Press [Next] of Job Accounting Setting, [Next] of
Default Setting, [Change] of Count by Paper Size,
[Change] of Paper Size 1 to 5 and then [On].
5
Select the paper size.
6
Press [Media Type] to specify media type.
7
Select the media type and press [OK].
8
Press [Close].
Management
11