Sending The Log History - Kyocera TASKalfa 250ci Operation Manual

Sending the Log History

You can send the log history by e-mail. You can either send it manually as needed or have it sent automatically
whenever a set number of jobs is reached.
Setting the Destination
Set the destination to which log histories are sent.
Use the procedure below to set the destination.
Automatic Log History Transmission
This function automatically sends the log history to the specified destinations whenever a set number of jobs
has been logged.
Use the procedure below to set automatic log history transmission.
1
Press the System Menu key.
2
Press [Report], [Next] of Sending Log History and
then [Change] of Destination.
3
To enter a new e-mail address, press [E-mail
Address Entry].
Press [E-mail Address], enter the destination e-
mail address and then press [OK].
4
To set an address from the address book, press [E-
mail Address Book].
Press [Address Book]. Select the destination from
the address book and press [OK].
NOTE:
For information on specifying destinations,
refer to Specifying Destination on page 3-30.
The selected e-mail addresses is displayed.
NOTE:
You can view information on the selected
destinations by pressing [Detail].
5
Press [OK].
1
Press the System Menu key.
2
Press [Report], [Next] of Sending Log History and
then [Change] of Auto Sending.
7-11
Status / Job Cancel
7