Override A4/Letter - Kyocera TASKalfa 250ci Operation Manual

Override A4/Letter

Select whether to treat A4 size and Letter, which are similar in size, as the same size when printing. The table
below shows the available settings.
Item
On
Off
Use the procedure below to specify the override A4/Letter setting.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Override A4/Letter.
3
Press [Off] or [On].
4
Press [OK].
Duplex
Select binding orientation for duplex mode. The table below shows the available settings.
Item
1-sided
2-sided Bind
ShortEdge
2-sided Bind
LongEdge
Use the procedure below to select a duplex setting.
1
Press the System Menu key.
2
Press [Printer] and [Change] of Duplex.
3
Press [1-sided], [2-sided Bind LongEdge], or [2-sided Bind ShortEdge].
4
Press [OK].
Copies
Set the default number of copies, from 1 to 999.
Use the procedure below to specify the default number of copies.
A4 and Letter are regarded as the same in size. The machine will
use whichever size is in the paper source.
A4 and Letter are not regarded as the same in size.
Description
No duplex mode
Shorter edge bound
Longer edge bound
8-37
Default Setting (System Menu)
Description
Finish
8