Enabling The Session-Control Feature - HP MSR Series Configuration Manual

Step
9. Specify the accounting
method for portal users.
10. Specify the accounting
method for PPP users.
11. Specify the accounting
method for SSL VPN users.
12. Configure access control
for users who encounter
accounting-start failures.
13. Configure access control
for users who have failed all
their accounting-update
attempts.
14. Configure access control
for users who have used up
their data quotas.

Enabling the session-control feature

A RADIUS server running on IMC can use session-control packets to inform disconnect or dynamic
authorization change requests. This task enables the device to receive RADIUS session-control
packets on UDP port 1812.
To enable the session-control feature:
Step
1. Enter system view.
2. Enable the session-control
feature.
Command
accounting portal { broadcast
radius-scheme radius-scheme-name1
radius-scheme radius-scheme-name2
[ local ] [ none ] | local [ none ] | none |
radius-scheme radius-scheme-name
[ local ] [ none ] }
accounting ppp { broadcast
radius-scheme radius-scheme-name1
radius-scheme radius-scheme-name2
[ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ] [ none ]
| hwtacacs-scheme
hwtacacs-scheme-name
[ radius-scheme radius-scheme-name ]
[ local ] [ none ] | local [ none ] | none |
radius-scheme radius-scheme-name
[ hwtacacs-scheme
hwtacacs-scheme-name ] [ local ]
[ none ] }
accounting sslvpn { local [ none ] | none
| radius-scheme radius-scheme-name
[ local ] [ none ] }
accounting start-fail { offline | online }
accounting update-fail { [ max-times
times ] offline | online }
accounting quota-out { offline | online }
Command
system-view
radius session-control enable
54
Remarks
By default, the default
accounting method is used
for portal users.
The none keyword is not
supported in FIPS mode.
By default, the default
accounting method is used
for PPP users.
The none keyword is not
supported in FIPS mode.
By default, the default
accounting method is used
for SSL VPN users.
The none keyword is not
supported in FIPS mode.
By default, the device does
not perform actions on
users who encounter
account-start failures.
By default, the device does
not perform actions on
users who have failed all
their accounting-update
attempts.
By default, the device logs
off users who have used up
their data quotas.
Remarks
N/A
By default, the session-control
feature is disabled.