Adding A Host - HP StorageWorks MPX200 User Manual

2. In HP Command View EVA, set up the iSCSI host and virtual disks.
a. Click the EVA Storage Systems icon to start the iSCSI storage presentation.
In Figure 43, MPX200-XL is the target EVA storage system.
Figure 43 Adding a host
.
b. Select the Hosts folder.
c. Click Add host to create an iSCSI initiator host.
A dialog box opens.
• Enter a name for the initiator host in the Name box.
• Select iSCSI as the Type.
• Select the initiator iSCSI qualified name (IQN) from the iSCSI node name list.
• Select an operating system from the Operating System list.
d. Create a virtual disk and present it to the host you created in
number in the target IQN; it is referenced during initiator login. See
45.
Step
MPX200 Multifunction Router User Guide
2.c. Note the circled
Figure 44 and Figure
63