Microsoft Cluster Server For Windows 2008; Iscsi Persistent Reservation Setup; Node Settings - HP StorageWorks MPX200 User Manual

2. Click Modify to make changes. See
3. Click Done to finish.
Figure 76 iSCSI Persistent Reservation Setup
.
Each cluster is required to have its own value, and each node of a single cluster must have its own
value. For example, Cluster A could have the default setting of AABBCCCCBBAA.
possible node settings.
Table 11 Node settings
Column Head
When the HP Full Featured DSM for EVA is installed, it sets up Persistent Reservation in the registry
by default. For more information on the HP DSM, see
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&
lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=18964&prodSeriesId=421492

Microsoft Cluster Server for Windows 2008

iSCSI Failover clustering is supported on the HP StorageWorks MPX200 Multifunction Router. For
more information, see http://technet.microsoft.com/en-us/library/cc754482.aspx.
104 MPX200 iSCSI configuration rules and guidelines
Figure 76
Node 1
Node 2
Node 3
Node 4
on page 104.
Column Head
Table 11 shows
1
2
3
4