Entering The Power-On Configuration; Installation Function - Compuprint 4051 User Manual

E n t e r i n g t h e P o
E n t e r i n g t h e P o
1. Make sure that the printer is turned off.
2. Keep pressed the
plus, 4056 plus or 4056N plus message will be displayed then Release button message.
3. Release the button key and the following message will be displayed:

INSTALLATION Function

Emulation Selection
RECALL FACTORY
↑
→ or ←
INSTALLATION
↓
INTERFACE
IBM XL III
IBM XL III emulation (4051/4051N plus models only - default).
IBM XL 24E emulation (4056/4056N plus models only - default).
IBM XL 24E
IBM XL 24E AGM emulation (4056/4056N plus models only).
IBM XL 24E AGM
EPSON FX Series emulation (4051/4051N plus models only).
EPSON FX
EPSON LQ 1050/2550 emulation (4056/4056N plus models only).
EPSON LQ
w e r - O n C o n f i g
w e r - O n C o n f i g
button key while turning on the printer. The 4051 plus, 4051N
PROGRAM
BUZZER
↑
→ or ←
PROTOCOL
↓
IBM/EPSON MODE
u r a t i o n
u r a t i o n
INSTALLATION
IBM xx
EPSON xx
38
↑ or ↓
↑ or ↓