On Line Key - Compuprint 4051 User Manual

ON LINE Key

ON LINE Normal Function Pressing this key you will obtain different results depending on the
Program
Function
printer status:
• When the
indicator is lit on, pressing this key you will cause
READY
the stop of the printing at the end of the current line; the
indicator blinks if there is some data left in the Input buffer,
otherwise the indicator is turned off and the Wait message will be
displayed.
• When the
is unlit or is blinking pressing this key the
READY
printing will be enabled and the
• Pressing this key while powering the printer on, the message
Printing test is displayed and the check test is executed. If you
want to stop the self-test press this key again.
Pressing this key you will obtain different results depending on the
interface configuration (parallel or serial interface).
• In parallel configuration, the information in the Input buffer is reset
and the Buffer cleared message will be displayed.
• In serial configuration, the information in the Input buffer is reset.
28
indicator is turned on.
READY
READY