Tear Off Line Adjustment; Select Macro; Print Adjustment - Compuprint 4051 User Manual

T e a r O f f L i n e
T e a r O f f L i n e
The Tear Off Line Adjustment procedure allows you to adjust the position of the fanfold
perforation in order to tear it against the printer tear off border on the cover. This procedure is
available only if the Program Setup is previously entered.
The Tear Off Line Adjustment procedure can be executed at any time during the printing.
Proceed as follows.
1. Make sure that the printer is not enabled to print (
Wait displayed).
2. Enter the Program Setup by pressing the
displayed:
3. Press the ↓ key until the following message will be displayed:
4. Press the → key to select the function. The following message will be displayed:
5. Now go on pressing the ↓ key until the following message will be displayed:
6. The following temporary message will be displayed :
Now if you press the → key the paper will be unloaded, reloaded and a form feed executed. The
paper will be taken to the corresponding tear off line.
Pressing the ↑ and ↓ keys you can scroll all the selectable values while the paper will be moved.
Pressing again the → key the displayed value will be selected.
A d j u s t m e n t
A d j u s t m e n t

PRINT ADJUSTMENT

BID. ALIGNMENT
TEAR PERFO ALIGN
Parking paper
READY
key. The following message will be
PROGRAM

SELECT MACRO

82
indicator unlit and the message