Compuprint 4051 User Manual page 29

Buffer cleared
Call Service
Carriage error
Check connection
Check interface
Check its moving
Check line
Comm. failure
Data lost
Enable path FF
Enable path SS
Fanfold
Displayed after input buffer clearing (all the stored data are erased).
Displayed in rolling mode together with the failure message to
indicate a call to Service.
Displayed when there is an unrecoverable carriage error. This means
that the printer carriage does not move correctly. When the
Carriage error message is displayed, the indicator
Check that the ribbon cartridge is not used up neither damaged.
Displayed when a DSR, DCD, or CTS signal fault occurs.
Displayed when an Input buffer overflow occurs
Displayed when a carriage fault occurs.
Displayed when a communication error occurs.
Displayed when a communication error occurs
Displayed when an input buffer overflow occurs.
This message appears on the display immediately after switching
Manual path to Fanfold path. Place the drive selection lever in the
fanfold position.
This message appears on the display immediately after switching
Fanfold path to Manual path. Place the drive selection lever in the
single sheet position.
This is one of the messages that will be displayed when you press
(Shift function). Press the
PATH
path.
key to select the fanfold paper
SHIFT
23
blinks.
READY