Switching From Fanfold Paper To Cut Sheet - Compuprint 4051 User Manual

S w i t c h i n g F r o m
S w i t c h i n g F r o m
If you have been using fanfold paper and you have not removed it, your printer allows the cut
sheet loading after performing a parking of the inserted fanfold paper (PARK function).
1. Make sure that your printer is turned on and disabled to print (
the fanfold paper that is currently loaded along the last perforation.
4051/4056 plus Models
2. You can perform the paper switching as follows:
• Press the
SHIFT
key. The fanfold paper moves backwards and the Enable path SS message will be
displayed, then place the drive selection lever in the cut sheet position. The message Load
paper will be displayed.
or
• Park the fanfold paper (PARK function). The Manual paper feeding will be automatically
selected when the cut sheet is loaded.
Now, your printer is ready to load cut sheet. Follow step 1 to 5 in "
F a n f o l d P a p e r
F a n f o l d P a p e r
key and then the
PATH
t o C u t S h e e t
t o C u t S h e e t
4051N/4056N plus Models
key. Select Manual and exit by pressing the
80
indicator unlit). Tear
READY
Loading Cut Sheets" section.
SHIFT