Compuprint 4051 User Manual page 31

Quiet --- OFF
Quiet --- ON
Ready M1-EPS
Release button
Remove paper
Self-test
Serial I/F error
Shift
Stand-by
Top cover open
Wait M1-EPS
Displayed when the Quiet function is not selected.
Displayed when the Quiet function is selected.
Displayed when the printer is on line and ready to print.
Generic user intervention message.
Displayed when Eject operation is not successful.
Displayed during the self test procedure. You can select the test
procedure keeping pressed the
printer. The printer is disabled to receive data from the host and the
indicator is unlit. To stop test procedure press again the
READY
LINE key.
Displayed when a DSR, DCD, or CTS signal fault occurs.
Displayed every time that the
the Shift function is selected.
Displayed when the printer is in stand-by status.
Displayed as long as the top cover is open.
Displayed when the printer is unable to print. The indicator
unlit
.
ON LINE
key is pressed to indicate that
SHIFT
25
key while turning on the
READY
ON
is