Compuprint 4051 User Manual page 71

Tear Position Alignment
TOP OF FORM
↑
→ or ←
TEAR PERFO ALIGN
↓
BIDI. ALIGNMENT
This function adjusts the tear off position in n/72 inch (4051/4051N plus models) or n/90 inch
(4056/4056N plus models). The values range between -36 and 36 (4051/4051N plus models) or
between -45 and 45 (4056/4056N plus models). At value selection level, the tear off line position
aligns to the corresponding tear off border of the printer cover. Pressing the ↑ or ↓ keys, the tear
off position moves in steps of 1/72 inch (4051/4051N plus models) or 1/90 inch (4056/4056N plus
models). When the tear off perforation line is set in the desired position, selects this value.
0/72 inches (4051/4051N plus models)
0/90 inches
(4056/4056N plus models)
...
36/72 inches
(4051/4051N plus models)
45/90 inches ( 4056/4056N plus models)
See "Tear Off Line Adjustment" later in this manual.
↑ or ↓
↑ or ↓
↑ or ↓
↑ or ↓
↑ or ↓
65