Compuprint 4051 User Manual page 78

3. If the printer is turned off, turn the printer on.
The display shows Load Paper, if there is no
paper in the printer. If you turn the printer on
when paper is already inserted, the display
will show Remove Paper while buzzer sounds
4 short "beeps".
The paper is
movement of maximum 24 inches. If you have
not removed the paper yet, the buzzer will
sound again 4 short "beeps". Finally the
display will show Load paper.
4. Feed the cut sheet in the slot. Press the
printable line. The paper is positioned at the first printable line at 1/6 inch from the top edge
of the paper. The last printable line of the sheet is positioned at 0.83 inch (21 mm) from the
bottom edge of the paper.
4051/4056 plus Models
ejected with a backward
or key. The paper will be loaded to the first
LOAD FF
4051N/4056N plus Models
72