Top Of Form Adjustment - Compuprint 4051 User Manual

T o p o f F o r m A
T o p o f F o r m A
The Top of Form Adjustment procedure allows you to adjust the position of the first printable
line and therefore it is advisable to perform it immediately after a paper loading. Turn the
printer on, if it is not, and proceed as follows:
Make sure that the printer is not printing. (
loaded, park it by pressing the
the FF key.
1. Press the PROGRAM
2. Press the ↓ key until the following message is displayed:
3. Press the → to select the function. The following message will be displayed:
4. Now go on pressing the ↓ key until the following message will be displayed
5. Press the → key to select the function. The paper is unloaded and reloaded at the TOF quote.
The current value will be printed and the display will show the following message:
The paper is moved to the view position. While scrolling all the possible values by pressing the ↑
and ↓ keys the paper will be moved.
Pressing again the → key the displayed value is selected and printed, after the paper has been
taken to the correct position. Then the paper will be taken to the view position.
d j u s t m e n t
d j u s t m e n t
key. If the cut sheet has been inserted, eject it by pressing
PARK
key. The following message will be displayed:
SELECT MACRO
PRINT ADJUSTMENT
BID. ALIGNMENT
TOP OF FORM
0/72 inches
0/90 inches
indicator unlit). If the fanfold paper has been
READY
(4051/4051N plus models)
or
(4056/4056N plus models)
81