Notes On Using Watchdog Timer - Fujitsu Semiconductor Controller MB89950/950A Hardware Manual

F2mc-8l 8-bit microcontroller
Table of Contents

Advertisement

CHAPTER 6 WATCHDOG TIMER
6.5

Notes on Using Watchdog Timer

This section lists points to note when using the watchdog timer.
I Notes on using watchdog timer
G
Stopping watchdog timer
Once activated, the watchdog timer cannot stop until a reset generates.
G
Clearing watchdog timer
Clearing the counter being used as a count clock of the watchdog timer (timebase timer or watch prescaler)
also simultaneously clears the watchdog timer counter.
The watchdog timer counter is cleared when entering sleep or stop mode.
G
Notes on programming
When writing a program in which the watchdog timer is repeatedly cleared in the main loop, including
interrupt processing, it should be less than the minimum watchdog timer interval time.
118

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mb89950 seriesMb89950a series

Table of Contents