Table of Contents
Advertisement
Table 12.3-2 Segment output select register bit functions
Bit
Bit 7
Unused bit
Bit 6
SEG15:
Segment output
selection bit
Bit 5
SEG14:
Segment output
selection bit
Bit 4
SEG13:
Segment output
selection bit
Bit 3
SEG12:
Segment output
selection bit
Bit 2
SEG11:
Segment output
selection bit
Bit 1
SEG10:
Segment output
selection bit
Bit 0
SEG00:
Segment output
selection bit
• The read value is indeterminate.
• Writing to this bit has no effect on the operation.
• Selects P24/SEG40 to P25/SEG41 to function either as N-ch open-drain I/O ports
(P24 to P25) or as LCD segment outputs (SEG40 to SEG41).
Note:
The setting of this bit MUST be consistent with mask option. This bit cannot
override the mask option.
• Selects P20/SEG36 to P23/SEG39 to function either as N-ch open-drain I/O ports
(P20 to P23) or as LCD segment outputs (SEG36 to SEG39).
Note:
The setting of this bit MUST be consistent with mask option. This bit cannot
override the mask option.
• Selects P17/SEG35 to function either as N-ch open-drain I/O port (P17) or as LCD
segment output (SEG35).
Note:
The setting of this bit MUST be consistent with mask option. This bit cannot
override the mask option.
• Selects P16/SEG34 to function either as N-ch open-drain I/O port (P16) or as LCD
segment output (SEG34).
Note:
The setting of this bit MUST be consistent with mask option. This bit cannot
override the mask option.
• Selects P14/SEG32 to P15/SEG33 to function either as N-ch open-drain I/O ports
(P14 to P15) or as LCD segment outputs (SEG32 to SEG33).
Note:
The setting of this bit MUST be consistent with mask option. This bit cannot
override the mask option.
• Selects P10/SEG28 to P13/SEG31 to function either as N-ch open-drain I/O ports
(P10 to P13) or as LCD segment outputs (SEG28 to SEG31).
Note:
The setting of this bit MUST be consistent with mask option. This bit cannot
override the mask option.
• Selects P00/SEG20 to P07/SEG27 to function either as N-ch open-drain I/O ports
(P00 to P07) or as LCD segment outputs (SEG20 to SEG27).
Note:
The setting of this bit MUST be consistent with mask option. This bit cannot
override the mask option.
CHAPTER 12 LCD CONTROLLER/DRIVER
Function
247
Advertisement
Table of Contents
