Logging Into The Printer Server; Remote Login - Emulex NJ01B-NT+ User Manual

3-14 Chapter 3

Logging into the Printer Server

You can log into the printer server remotely from a Novell workstation using
the TES terminal emulation program and the Kermit protocol or locally from
a console terminal. These methods are described below.

Remote Login

Novell workstations require the TES terminal emulation program and the
Kermit protocol in order to perform a remote login to the printer server
TES can be loaded at any DOS prompt or from the AUTOEXEC.BAT file.
TES must be loaded before starting the Kermit program. These files are
available on the CD-ROM or on the DOS utilities diskette.
TES
MS-DOS Kermit
INSTALL
READ.ME
The following procedure installs the TES and Kermit software on the system
and establishes a connection to the printer server:
1) Login to a Novell workstation.
2) Change to a DOS prompt.
3) Place the CD-ROM or diskette in the drive and enter one of these
commands:
CD-ROM:
>
C:> md tes-krmt
>
C:> cd tes-krmt
>
C:> xcopy d:\utils\ps50\tes\*.* /S
This command installs the files on the CD-ROM from drive D to drive C.
The /S option will recurse the directory structure.
Diskette:
TSR program that provides NetWare terminal
transport to enable access to the remote console
facility under NetWare.
Terminal emulator which is used in conjunction
with TES.
DOS Installation script for the printer servers.
Readme file for using TES with Emulex Printer
servers. For more information, examine the
read.me file.