Power Up - Emulex NJ01B-NT+ User Manual

NOTE: Serial cable between the printer server and the

Power Up

1) Verify the LAN connection to the printer server is secure.
2) Verify all serial and parallel cable connections are secure.
3) Attach power cable to the printer server AC power receptacle and to an
accessible AC power outlet. The printer server will power up.
CAUTION: The AC power outlet must be accessible for
00-00-C9-01-A0-6A
NOTE: If the printer server is being used outside the
peripheral device or console terminal should not
exceed 50 feet (15.24 meters). Connection can be
made through a null modem cable.
immediate removal of power.
MAC ADDRESS
Figure 2-12: Power Outlet
United States where voltages may vary, it will
automatically adapt to the change of input voltages
when AC power is applied. Please refer to the
power cord selection card supplied with the printer
server for appropriate power cord configuration.
Printer Server Installation 2-17
Power
POWER