Diskette - Emulex NJ01B-NT+ User Manual

mount_point The directory path mount point for the CD-ROM
The tar command creates a subdirectory called emlx under the current
working directory and extracts the UNIX utilities into the emlx directory.
5) Go to the Emlx directory:
>
#cd emlx
6) Enter:
>
#enstall -s
When the enstall utility begins, follow the instructions and supply the
requested information. When the ENSTALL program is complete, the
Emulex printer server is ready to use.

Diskette

1) Logon as root at the system prompt.
2) Change to a directory where third party software is typically installed.
For example, /usr
3) Load the UNIX Utility diskette into a 3.5 floppy disk drive.
4) Extract the files from the diskette to the hard drive.
>
#tar xvf device_file ./emlx
device_file The UNIX device file for the floppy drive.
For example:
>
#tar xvf /dev/fd0 ./emlx
The tar command creates a subdirectory called Emlx under the current
working directory and extracts the UNIX utilities into the Emlx
directory.
5) Go to the Emlx directory:
>
#cd emlx
6) Enter:
>
#enstall -s
drive.
UNIX TCP/IP 4-3