Emulex NJ01B-NT+ User Manual page 190

9-8 Chapter 9
2) Enter:
>
Server>> change service lpd port all disable
>
Server>> change service printer_name TCP_port_n
PORT n telnet disable filter [enable |disable]
printer_name The unique printer name to assign
TCP_port_n
n
enable|disable Enable is equivalent to TEXT and inserts a carriage
For example:
The following commands change the name of the printer on the
parallel port to Parallel which supports a PostScript printer:
To include an ID for the newly created printer, enter the following
command:
3) Return to Windows NT to complete the remaining steps:
4) Click the S
P
RINTER
Select this option to provide other users with access to this printer.
The TCP port name other than 515. Emulex
suggests starting at 3000
The physical parallel port of the printer server
return <CR> with each line feed <LF>. Disable is
equivalent to PASSTHRU and sends data with no
changes.
>
Server>> change service lpd port all disable
>
Server>> change service parallel 3001 port 1
>
Server>> change service parallel id "HP4si on
default printer server name in Room 1231"
T P
HARE HIS RINTER
dialog box:
O T N option in the C
N HE ETWORK REATE