Printer Test; Printer - Emulex NJ01B-NT+ User Manual

1) Select desired options.
2) Click OK.
This returns the user to the A
3) Click A
DD
The printer is now ready for use. Continue with the Printer Test section.
NOTE: The service to connect to on the Emulex printer

Printer Test

Test the printer as follows:
1) Close all windows.
2) Verify the printer and Emulex server are powered up and the printer is
on-line.
3) Select a text file (for example, README.TXT) from any folder.
4) Drag the file to the P
5) Select P
The file should print.
NOTE: LAN Manager does not validate the Service Name,
.
server must have the NetBios Protocol enabled
before printing.
RINTER
-T when prompted.
LAIN EXT
IP Address, or Port Number parameter values. If
the printer changes to the off-line state when
attempting to print, check that the above
parameters have been entered correctly.
N P window.
DD EW RINTER
icon.
Lan Manager 7-11