Create Atcp/Ip Printer; Create A Tcp/Ip Printer - Emulex NJ01B-NT+ User Manual

9-4 Chapter 9
NOTE: If the Enable Automatic DHCP Configuration
The N
ETWORK
9) Select C
10) Restart the computer.
A TCP/IP printer can now be created on this Windows NT computer.

Create a TCP/IP Printer

Use Print Manager to create a TCP/IP printer. The following information is
required:
•
The IP identifier of the host where the printer is connected.
This can be the DNS name or the IP address. A direct-connect printer
has its own IP identifier. A printer connected to a UNIX computer uses
the computer's IP identifier.
•
The printer name as identified on the host.
This is the name defined on the UNIX computer or defined by the direct-
connect printer manufacturer.
The computer where the TCP/IP printer is created must have TCP/IP
installed and configured with the TCP/IP Network Printing Support option.
From the P
RINTER
1) Select C
option is not checked in the Installation Options
dialog box, all required procedures for manually
configuring TCP/IP must be completed as
described in the Windows NT System Guide.
S dialog box will open.
ETTINGS
.
LOSE
menu in P
RINT
P .
REATE RINTER
M :
ANAGER