2-30 Chapter 2
NOTE: Serial cable between the printer server and the
Power Up
CAUTION:
1) Verify the LAN connection to the printer server is secure.
2) Verify all serial and parallel cable connections are secure.
3) Attach the modular power supply cable to the printer server jack labeled
+5 VDC.
4) Plug the power supply module into an AC power outlet.
The printer server will power up and go through a self-test.
NOTE: Please refer to the Optional Power Supply
peripheral device or console terminal should not
exceed 50 feet (15.24 meters). Connection can be
made through a null modem cable.
The AC power outlet must be accessible for
immediate removal of power.
Figure 2-19: Power Outlet
Specification section if the printer server is being
used outside the United States where voltages may
vary.
Power
Connector