Lan Server 4.0; Nstallation; Installation - Emulex NJ01B-NT+ User Manual

8-4 Chapter 8

LAN Server 4.0

To configure printers to be shared on the network, login to the LAN Server
as admin and verify setup.
Verify the network interface card (NIC) is configured for TCP/IP.
1) Run the Multi-Protocol Transport Services Utility (MPTS).
2) Select C
3) In the C
URRENT
TCP/IP protocol under each appropriate adapter or interface card (NIC).
4) If not, refer to the LAN Server documentation for information on
configuring and enabling the TCP/IP protocol stack.

Installation

To install the software utilities:
1) Insert the distribution diskette or CD-ROM into a drive.
2) Open an OS/2 Window.
3) Select the appropriate drive.
4) Type I
NSTALL
The I

NSTALLATION

NOTE: When installing from CD-ROM change the default
5) Choose LAN SERVER.
When the installation is complete the following message will appear:
Installation Completed Successfully.
6) Click E
XIT
LAN A
ONFIGURE DAPTERS AND
C
ONFIGURATION
and press E
NTER
screen will be displayed.
path to d:utils/ps50/lanservr. This path assumes d:
is the CD-ROM drive.
.
P
ROTOCOLS
box, there should be an entry for IBM
.
.