Configure Lpd For Non-Unix Hosts - Emulex NJ01B-NT+ User Manual

4-18 Chapter 4
4) Add the server's
For example:
IP_address
node_name
5) To start the printer queue:
>
#lpc start printer_name
printer_name
6) Enter:
>
#lpr -Pprinter_name file_name
printer_name
file_name

Configure LPD for Non-UNIX Hosts

Many non-UNIX hosts using TCP/IP support printing through the LPD
protocol. Refer to the host's TCP/IP documentation to configure printers
using LPD. Information needed to configure the printer server includes:
•
The IP address of the printer server
•
The remote queue (printer) name
•
TEXT and PASSTHRU as the printer server's default queue names
•
Either default TCP or acceptable TCP ports depend upon host
environment requirements.
node_name
>
#IP_address
The printer server IP address in decimal dot
notation.
The same entered in the /etc/printcap file in step 2.
Any text file name.
to the /etc/hosts file.
node_name
The remote printer queue name.
The remote printer queue name.