Logging Into The Printer Server; Remote Login - Emulex NJ01B-NT+ User Manual

Logging into the Printer Server

You can login to the printer server remotely from a DEC workstation using
the VAX NCP utility or locally from a console terminal.

Remote Login

1) Login to the DEC workstation.
2) Run the VAX NCP utility:
>
$ run sys$system:NCP
3) To view the available circuit IDs, enter:
>
show known circuit
4) Connect to the printer server RCF port:
>
NCP> connect via
MAC_address
CIRC_ID
MAC_address The printer server's Ethernet (MAC) address in the
5) When the following message appears, press E
>
Console connected (Ctrl-D when finished)
6) Enter the password:
>
# access
where access is the default printer server remote login password.
NOTE: The password does not appear when typed.
7) Verify banner.
When the connection is made, the printer server login banner is
displayed.
8) At Enter Username or Help>, enter any alpha-numeric characters.
CIRC_ID physical address
The Ethernet circuit ID.
form 00-00-c9-xx-xx-xx.
VAX/VMS DECnet LAT 5-3
to continue:
NTER