Peripheral Connections; Parallel Port; Parallel Port; Serial Port - Emulex NJ01B-NT+ User Manual

Peripheral Connections

Parallel Port

The parallel port provides a female DB25 connector and supports the
following types of peripherals:
•
A printer or plotter supporting a Centronics parallel port
•
A printer or plotter supporting the bi-directional parallel interface
(IEEE 1284)
NOTE: The parallel cable between the printer server and

Serial Port

Connect to the serial port with a null modem cable. The serial port provides a
male DB9 connector and allows user to:
•
Print to a serial printer or plotter.
•
Monitor the printer server by connecting an ANSII compatible terminal or
a PC running an ANSII terminal emulation program.
The Emulex default port configuration is set for 9600 bps, 8 data bits, no
parity, 1 stop bit, DTE type, with softcopy emulation.
•
Input print jobs directly by connecting to a host system serial port (e.g. an
HP 3000).
the printing device should not exceed 12 feet (3.65
meters).

Serial Port

Parallel Port

Figure 2-18: Peripheral Connections
Printer Server Installation 2-29