Address Book PIN
If you choose to enter a PIN for the
personal Address Book, you will have to
enter it anytime you edit your Address
Book (see page 72), or select Address
Book on the Enter destination by
screen (see page 39).
1. Select Address Book PIN.
2. Select either User 1 or User 2. The
display changes to:
3. Enter your four-digit PIN and select
Done. If you do not wish to use a
PIN, select Do not use PIN.
The factory default is no PIN.
4. If you have entered the PIN correctly,
the display changes to the Please re-
enter new PIN screen. Enter the
same number, then touch Done to
validate the number you have
5. If you have entered the same number
both times, the display returns to the
Edit personal information screen. If
not, incorrect PIN appears in the
upper right corner of the screen. Enter
your PIN again.
If you wish to remove your PIN, return
to the same screen and, after entering
your PIN, touch the Do not use PIN
Go Home PIN
1. Select Go Home PIN, and the
system displays the Enter your new
2. Enter your PIN in the same way as
entering the Address Book PIN.
The factory default is no PIN. If you
choose to use a PIN, you will have to
enter it whenever you say "Go Home"
at the map screen, or select Go Home
on the Enter destination by screen.
You can change User 1 and User 2 to
a desired name. Choose either User 1 or
User 2 on the Select the user name to
edit screen. Enter the name, and say or
select Done to leave the screen.