Driving to Your Destination
It may take several minutes (the system
displays an hour glass while it is
calculating) to show all route methods,
and it is not unusual for the different
methods to pick the same route. Voice
commands cannot be used while the
system is calculating.
Say or select Summary to display the
distance and time to go for each route.
Based on the summary data, you can
change the routing by using the Next
and Prev. buttons.
Once you confirm your selection, say or
select OK on the screen.
Distances and times show for each
method in the Summary are
After calculating the route with the new
method, the system displays a map of
your current location. The calculated
route will be highlighted as a blue line,
and a voice prompt will tell you how to
proceed along the highlighted route.
Touch Voice to have the guidance
Viewing the Destination Map
Touching View Dest. Map displays a
map of the destination vicinity. Press the
CANCEL or BACK button to return.
When you select OK on the Calculate
route to screen, the map screen
When driving to a destination on
verified roads in a metropolitan area, the
route line is displayed as a blue line.
When driving in rural areas on
unverified streets (light brown color),
the route line changes to either a blue
dotted "vector line" pointing to your
destination, or a blue-pink line. See
Unverified Area Routing on page 79 for
a detailed explanation of how to enable
unverified routing, and the related
cautions and disclaimers.