Using The Voice Control System - Honda Ridgeline Navigation Manual

Getting Started
Microphone
(on the ceiling)
Talk button
This button activates the voice control
system. Press it when you want to give a
voice command. See Voice Command
Index on page 118 for a list of voice
commands.
12
Navigation System
BACK button
This button has the same function as the
CANCEL button. When you press it,
the display returns to the previous
screen. When the previous screen
appears, the system replays the last
prompt. This button is enabled for the
navigation system commands only.
However, it can be used to cancel an
audio or climate control voice command
up to one second after the command
confirmation.

Using the Voice Control System

Most of the system's functions can be
controlled by voice commands. The
voice control system is activated with
the Talk button. To control your
navigation system by voice, press and
release the Talk button, wait for the
beep, then give a voice command. Once
the microphone picks up your
command, the system changes the
display in response to the command and
prompts you for the next command.
Using the Talk button, answer the
prompts as required.
If you hear a prompt such as "Please use
the touch screen to..." or "Please choose
an area with the joystick," the system is
asking for input that cannot be
performed using the voice control
system.
If the system does not understand a
command or you wait too long to give a
command, it responds with "Pardon,"
"Please repeat," or "Would you say
again." If the system cannot perform a
command or the command is not
appropriate for the screen you are on, it
sounds a beep.