When I drive at night, the screen is bright and will not switch
to the night display mode. Why?
The daytime map screen is dark like the night display mode,
and it is hard to see. Why?
During the day, I turned on the lights because it started to
rain, but the screen went dark. How can I make it still display
How can I input my destination using map coordinates?
How do I change or remove my PIN?
I forget the PIN for Home, or the PIN for personal addresses
(User 1 or User 2). How do I reset it?
Rear Camera FAQs (vehicles with optional rear camera)
When I shift gears, the rear camera image is delayed.
The rear camera image is too dark or too bright, how do I
adjust the brightness?
Verify the following: The display mode in Setup is set to Auto, the dash
brightness is not set to maximum, and Map Color in Setup is set to Black
for Night. See Display on page 70.
Verify the following: The display mode in Setup is set to Auto, and Map
Color in Setup is set to White for Day. See Display on page 70.
Adjust the dash brightness (+) button to full brightness. Remember to set it
back to a medium setting, or at night, the screen will be bright. See Display
on page 70.
The navigation system was not designed for this. However, you can view
the coordinates of an address by touching the vehicle position icon on the
map. See Map Screen Legend on page 46.
Go to "Personal Information" in the Setup screen (second), and select PIN
Number. Select User 1 or User 2 and enter your existing PIN. You then
have the choice to change or remove the PIN. See page 75.
PINs are optional. See information regarding PINs on page 75. Your dealer
can reset the PIN for you.
When shifting into or out of reverse, you may experience delays when the
screen image switches between the navi screen and the rear camera image.
This is normal.
While the camera image is displayed, use the Zoom In/Zoom Out controls
to adjust the brightness. This adjustment does not affect the "Setup" screen
Frequently Asked Questions
Navigation System 109