Changing the DVD
The system's database is stored on a
removable DVD. The system will not
work without the DVD. Ensure the door
remains closed at all times.
1. Remove the DVD while the ignition
switch is in the Accessory (I) position
or in the ON (II) position.
2. Locate the control unit. It is under the
front of the driver's seat.
3. Push the OPEN button.
4. Push the Eject button. The DVD will
automatically come out and an error
message will display on the screen.
This is normal.
5. Pull the DVD straight out. Hold the
DVD by the edges. Fingerprints,
scratches, or other contamination on
the playing surface can make the
To install the Navigation DVD, make
sure the white label is facing up. Slide
the DVD into the slot. The DVD is
automatically pulled into the control
unit. Make sure you close the door.
If you see the error message
"Navigation unit door is open...," close
A PC card is not supplied. The PC card
slot is for factory use only.
PC card slot