System Map: Right View - EUROCOM D900T PHANTOM User Manual

System Map: Right View

2
1
Changing DVD Regional Codes
Go to the Control Panel and double-click System >
Hardware (tab), click Device Manager, then click
the + next to DVD/CD-ROM drives. Double-click on
the DVD-ROM device to bring up the Properties di-
alogue box, and select the DVD Region (tab) to
bring up the control panel to allow you to adjust the
regional code (see "DVD Regional Codes" on
page 2 - 5).
DVD region detection is device dependent, not OS-
dependent. You can select your module's region
code 5 times. The fifth selection is permanent. This
cannot be altered even if you change your operating
system or you use the module in another computer.
1.
3
2.
3.
CD Emergency Eject
If you need to manually eject a CD/DVD (e.g. due to an
unexpected power interruption) you may push the end of a
straightened paper clip into the emergency eject hole. Do not use
a sharpened pencil or similar object that may break and become
lodged in the hole.
Media Warning
Don't try to remove a floppy disk/CD/DVD while the system is ac-
cessing it. This may cause the system to "crash".
System Map: Right View 1 - 11
Quick Start Guide
Figure 1 - 6 - Right View
Primary Optical Device Drive
Bay (for CD/DVD Device)
Secondary Optical Device
Drive Bay (for CD/DVD
Device)
Security Lock Slot
1